Author Topic: Sherco 2018 tall guy mods  (Read 3783 times)

MarcoTwoStroke300

  • Novice
  • *
  • Posts: 25
    • View Profile
    • Email
Sherco 2018 tall guy mods
« on: May 11, 2018, 10:49:56 PM »
How made some changes for being a little tall for the bike?
I'm 193cm and don't feel 100% comforts on the bike.
The factory has already the 2cm taller seat but it feels like the footpegs are much to high.
I changed them for 0.5cm lower ones but it isn't enough.
Also raised the bars 2cm
How of the tall people made some changes that worked?

Boogie

  • Intermediate
  • ***
  • Posts: 217
  • 2014 300 SE R
    • View Profile
Re: Sherco 2018 tall guy mods
« Reply #1 on: May 14, 2018, 06:52:06 PM »
Try fastway evo 3 pegs. They’re about 10mm lower and 10mm further back. Makes a difference.

Put your bars in at least 3rd forward position in the clamps.
I don’t use risers.
2014 SE R 300
Australia

MarcoTwoStroke300

  • Novice
  • *
  • Posts: 25
    • View Profile
    • Email
Re: Sherco 2018 tall guy mods
« Reply #2 on: May 16, 2018, 11:31:41 AM »
Hello

Thanks alot i will buy these footrest
The handle bar is in the third forward position with 20mm riser.
I just Buyed a higher seat also
Factory seat plus 15mm
35mm more than racing seat.

Team Topar

  • Novice
  • *
  • Posts: 7
    • View Profile
Re: Sherco 2018 tall guy mods
« Reply #3 on: June 15, 2018, 07:58:17 AM »
I am 192cm and run stock bars with the IMS CORE MX Pegs, slightly further back and it works great!

theailer

  • Novice
  • *
  • Posts: 9
    • View Profile
Re: Sherco 2018 tall guy mods
« Reply #4 on: January 12, 2020, 01:10:17 AM »
Sorry for the necro, but which of the ims core mx pegs fit a Sherco?