Author Topic: 2014 250 w/300 cyl part out  (Read 1389 times)


  • Vet
  • *****
  • Posts: 516
    • View Profile
2014 250 w/300 cyl part out
« on: January 09, 2020, 09:35:38 AM »
Guys, I have the first 2t that was air freighted over back when Clay started this craziness! Considering parting it out or selling. I have the following for it.

Original 250 cyl
S3 head with red dome(have stock as well)
CC forks are on bike now
Have AER forks and complete ktm front wheel setup
    Valved by MVR for hard Enduro
OEM Sherco fan kit
Lithium battery
Neken SFS upper triple clamp(these are trick)
Oversized front rotor kit
BPD Radiator guards/brace
EE Bark Busters
Licensed and titled in TN
Frame signed by Mario.

I have no idea what the total hours are on the bike. Taras, Clay's Sherco tech, completely rebuilt the motor from the crank up two years ago. Will need a top end and a little tlc. Let me know if anyone is interested. Or make me a fair offer for the whole thing. Thanks, JLow.
'19 FSE 300
'14 Sherco 300 SEF-R (Miss Sweets)
'14 Sherco 250 SE-R (Miss Spicy 3Huney)

Nashville, TN USA


  • Novice
  • *
  • Posts: 21
    • View Profile
    • Email
Re: 2014 250 w/300 cyl part out
« Reply #1 on: October 31, 2020, 06:46:14 PM »
Not sure if any of these parts remain available...Im interested in the OEM fan kit and bark busters
"all men ought to be explorers"


  • Junior
  • **
  • Posts: 64
    • View Profile
Re: 2014 250 w/300 cyl part out
« Reply #2 on: January 14, 2021, 04:05:16 PM »
Hey J low.....I have a 2014 250 I picked up from Chris....need some cylinder related stuff. Can you please let me know if you have anything? Im also moderator on US sherco riders on FB.