Author Topic: brake lights  (Read 133 times)

blissy

  • Novice
  • *
  • Posts: 4
    • View Profile
    • Email
brake lights
« on: July 24, 2020, 11:09:12 AM »
hi all got 250 sef 2016 are there factory fitted brake light switches on these or do you have to fit them yourself my tail light works but nothing happens when i use front or rear brakes thanks

cesllc

  • Intermediate
  • ***
  • Posts: 160
    • View Profile
    • Email
Re: brake lights
« Reply #1 on: July 24, 2020, 02:55:27 PM »
On the 2017 (U.S. models) the brake light is factory, connected to a pressure switch on the front brake.
« Last Edit: July 24, 2020, 02:58:05 PM by cesllc »
2017 300SE Six Days with racing plastic
2017 300SEF Six Days
Southwestern Michigan

blissy

  • Novice
  • *
  • Posts: 4
    • View Profile
    • Email
Re: brake lights
« Reply #2 on: July 27, 2020, 07:55:11 AM »
i found the switch on the front brake lever brake light now works with front brake but not rear brake cant see a switch of any kind on rear brake

hamilton

  • Novice
  • *
  • Posts: 31
    • View Profile
    • Email
Re: brake lights
« Reply #3 on: July 27, 2020, 01:25:12 PM »
i found the switch on the front brake lever brake light now works with front brake but not rear brake cant see a switch of any kind on rear brake

No switch from factory for rear brake.
You could replace the banjo bolt on rear master cylinder with ktm brake light switch.
You would also need to fabricate a harness to make it work.
If you got to have the rear brake operate the light.