Author Topic: 2019 125 se power valve  (Read 125 times)

BCWildman

  • Novice
  • *
  • Posts: 5
    • View Profile
    • Email
2019 125 se power valve
« on: August 06, 2020, 09:16:08 AM »
Flat on top. Does not seem to rev out 100%. Checked power valve operation and it does not seem to be initializing correctly on hard setting. Will not tension the cable. Motor spins but something is not right. Any ideas?

BCWildman

  • Novice
  • *
  • Posts: 5
    • View Profile
    • Email
Re: 2019 125 se power valve
« Reply #1 on: August 06, 2020, 09:23:21 AM »
I pulled it apart. The motor seems to jump around a little.

bad-mod

  • Intermediate
  • ***
  • Posts: 120
    • View Profile
    • Email
Re: 2019 125 se power valve
« Reply #2 on: August 06, 2020, 12:13:49 PM »
Are there any signs of water ingress? Is it o ly on the one map ?

Sent from my SM-N960F using Tapatalk

16 SE-R Factory
91 DR 350 =>450
76 FLH Shovelhead

BCWildman

  • Novice
  • *
  • Posts: 5
    • View Profile
    • Email
Re: 2019 125 se power valve
« Reply #3 on: August 06, 2020, 12:43:07 PM »
I think I figured it out. The original owner put it together wrong somehow. The way the cables wrapped on the upper drum did not seem right. Took it all apart and it went together quite a bit different. Just need a test ride to check it out.