Author Topic: Clutch Master Cylinder  (Read 681 times)

Nerminater

  • Novice
  • *
  • Posts: 16
    • View Profile
    • Email
Clutch Master Cylinder
« on: December 28, 2020, 03:04:14 AM »
Anyone have a clutch master cylinder for sale, I notced mine has cracked through underneath the handlebar clamp and needs replacing. Cant find any sense looking though the sherco catalogues and parts manuals.
2016 SE-R250 SIX DAYS
2012 WR250FA
1984 XT250G
1992 DR350E
1989 KDX 250

jamracing

  • Vet
  • *****
  • Posts: 565
    • View Profile
    • Email
Re: Clutch Master Cylinder
« Reply #1 on: December 30, 2020, 07:03:43 PM »
You can use a KTM unit, will work just fine
2020 300 SE Factory

HHlive

  • Novice
  • *
  • Posts: 1
    • View Profile
Re: Clutch Master Cylinder
« Reply #2 on: April 05, 2021, 09:14:56 AM »
So you happen to have a parts number?  I have a 2020 300 se-f...the pics Iím finding donít quite seem to match up...any help is appreciated.

Nerminater

  • Novice
  • *
  • Posts: 16
    • View Profile
    • Email
Re: Clutch Master Cylinder
« Reply #3 on: April 10, 2021, 12:40:41 AM »
You can use a KTM unit, will work just fine

Thanks for that, but for me it begs another question. When cold my clutch drags a little, to the point of it refusing to start in gear, so If I had to replace the cylinder with one off another make, is there one with a better ratio than the OEM Sherco to give that little bit extra throw at the basket?
2016 SE-R250 SIX DAYS
2012 WR250FA
1984 XT250G
1992 DR350E
1989 KDX 250