Author Topic: 2021 300 SE throttle pull and upsizing sprockets  (Read 1083 times)

JS_MO

  • Novice
  • *
  • Posts: 24
    • View Profile
Re: 2021 300 SE throttle pull and upsizing sprockets
« Reply #15 on: March 19, 2021, 04:29:21 AM »
I finally got the ZRT cam. It's a machined piece of plastic. Looks like Delrin. Its a super tight fit onto the throttle tube. The cam profile is like any older mx 2 stroke bike. A full, constant radius. The first time I snapped it on, it looked perfect. When I assembled the throttle assembly on the bar, it had a little bind. After an hour's worth of investigation, I took the cam off the tube and snapped it back on. Voila, it was fixed. A bit pricey, but he's likely got two machining setups on this and some small tooling. Fair price hones23tly. Would be nice if ODI made a mold to shoot the part, especially if it's like the oem cam with two options.

Maybe this helps.

Sfade

  • Intermediate
  • ***
  • Posts: 143
    • View Profile
    • Email
Re: 2021 300 SE throttle pull and upsizing sprockets
« Reply #16 on: March 19, 2021, 11:55:45 AM »
My ZRT cam is on its way.  Looking fwd to getting my favorite lockons back in the game.  Hopefully the fitment is good so I don't have to do any dremel work--why I had to buy one b/c my dremel of ODI cam to match Sherco didn't turn out so hot.  To be determined.
2021 Sherco 300 SE Factory
2020 Sherco 300 SEF Factory (Supermoto)
2019 KTM 250XC

Iakovos1

  • Novice
  • *
  • Posts: 31
    • View Profile
Re: 2021 300 SE throttle pull and upsizing sprockets
« Reply #17 on: March 31, 2021, 03:53:35 AM »
I went with a standard Domino throttle set up just like the older KTM's, Beta's, GG's, etc... MP KTM cable, and the map switch and start button from G2/Sicass.  Now I have a setup that I'm very familiar with and I can use ODI lock ons with no issue.

Currently have 14/49 set up but I ordered a 13 to have as well.

alang

  • Vet
  • *****
  • Posts: 643
    • View Profile
    • Email
Re: 2021 300 SE throttle pull and upsizing sprockets
« Reply #18 on: April 02, 2021, 01:56:23 PM »
I just saw sherco hard parts
Has a bullet throttle tube
With bearings. (Blue)
I run 13 52 gearing and ODI lock on grips.
Would like to try Pro Taper pillow top lock
On grips though.
« Last Edit: April 02, 2021, 01:58:59 PM by alang »
2017 Sherco 300 2T Factory
2016 Aprilia Tuono 1100 Factory
2019 Santa Cruz Tallboy Carbon R
Azle, Texas

alang

  • Vet
  • *****
  • Posts: 643
    • View Profile
    • Email
Re: 2021 300 SE throttle pull and upsizing sprockets
« Reply #19 on: April 02, 2021, 05:38:24 PM »
ODI lists the S cam as also
Working for 2016-2018
2 strokes.  I guess thats
Why my 2017 works ok.
2017 Sherco 300 2T Factory
2016 Aprilia Tuono 1100 Factory
2019 Santa Cruz Tallboy Carbon R
Azle, Texas

Sfade

  • Intermediate
  • ***
  • Posts: 143
    • View Profile
    • Email
Re: 2021 300 SE throttle pull and upsizing sprockets
« Reply #20 on: April 03, 2021, 05:15:29 AM »
ODI just changed their literature to state it works with older Sherco 2Ts.  It did not say that a couple of months ago when I ordered. 
2021 Sherco 300 SE Factory
2020 Sherco 300 SEF Factory (Supermoto)
2019 KTM 250XC

Iakovos1

  • Novice
  • *
  • Posts: 31
    • View Profile
Re: 2021 300 SE throttle pull and upsizing sprockets
« Reply #21 on: April 06, 2021, 08:07:14 AM »
I just saw sherco hard parts
Has a bullet throttle tube
With bearings. (Blue)
I run 13 52 gearing and ODI lock on grips.
Would like to try Pro Taper pillow top lock
On grips though.
Where did you see billet tube?  I looked on RYP website and sherco.com and did not see it...

alang

  • Vet
  • *****
  • Posts: 643
    • View Profile
    • Email
Re: 2021 300 SE throttle pull and upsizing sprockets
« Reply #22 on: April 06, 2021, 04:52:19 PM »
It was on IG I think.
Oxia blue bullet throttle
With bearings.
2017 Sherco 300 2T Factory
2016 Aprilia Tuono 1100 Factory
2019 Santa Cruz Tallboy Carbon R
Azle, Texas

Gartzza

  • Novice
  • *
  • Posts: 46
    • View Profile
Re: 2021 300 SE throttle pull and upsizing sprockets
« Reply #23 on: April 16, 2021, 03:34:23 AM »
ODI just changed their literature to state it works with older Sherco 2Ts.  It did not say that a couple of months ago when I ordered.

Any idea what would be the correct ODI cam for 2019 SE 300? I bought cam S for my bike, as well, but it's not good - too much twisting to get throttle fully open (more than with standard throttle tube). I saw a cheap (29) aluminum throttle tube "Psychic" somewhere in the net and they stated that it should fit to SE 2019MY too, but actually I don't believe it  ;D Well, I try to find out, whether it works as standard..

DEL107

  • Novice
  • *
  • Posts: 26
    • View Profile
Re: 2021 300 SE throttle pull and upsizing sprockets
« Reply #24 on: April 16, 2021, 07:23:03 PM »
ODI just changed their literature to state it works with older Sherco 2Ts.  It did not say that a couple of months ago when I ordered.

Any idea what would be the correct ODI cam for 2019 SE 300? I bought cam S for my bike, as well, but it's not good - too much twisting to get throttle fully open (more than with standard throttle tube). I saw a cheap (29) aluminum throttle tube "Psychic" somewhere in the net and they stated that it should fit to SE 2019MY too, but actually I don't believe it  ;D Well, I try to find out, whether it works as standard..

ZRT cam with ODI lock on grips is the cats meow. "buy once cry once" If you run full wrap hand guards order KTM black open end ODI lock ons for a clean set up. Otherwise to get a good pull the stock sherco cam flipped to the moto setting works great if you don't mind old school grips

alang

  • Vet
  • *****
  • Posts: 643
    • View Profile
    • Email
Re: 2021 300 SE throttle pull and upsizing sprockets
« Reply #25 on: April 17, 2021, 05:12:00 AM »
I ordered the G2 billet pro
Enduro throttle for Sherco.
Just want to try a billet one
With bearings. Also renthal
Glue on grip for right side.
2017 Sherco 300 2T Factory
2016 Aprilia Tuono 1100 Factory
2019 Santa Cruz Tallboy Carbon R
Azle, Texas