Author Topic: fmf pipe fitment  (Read 305 times)

Stoby

  • Novice
  • *
  • Posts: 44
    • View Profile
    • Email
fmf pipe fitment
« on: January 03, 2022, 11:24:03 AM »
Trying to find pipe for 17 . Showing 18 up . Any real difference? I thought 17 was the year the platform changed a little from the 16 and older models. I've been trying to find the info ,no luck. The fmf site is not allowing model input so I can't even get part number . Any help? Thanks
« Last Edit: January 03, 2022, 12:29:58 PM by Stoby »
17 Sherco 300 ser
09 Gasgas 300
01 Gasgas  300
88 Goldwing , 05 Roadstar , 01 Aprilia RSV , 03 Aprilia Falco Streetfighter , 1970 CB 750 Chop
A few other projects and a Brandy New FZ10

TTBadDog

  • Junior
  • **
  • Posts: 57
    • View Profile
Re: fmf pipe fitment
« Reply #1 on: January 04, 2022, 01:25:06 PM »
I had questions on Carbon Fiber pipe protectors and ran into the same thing. I cannot answer your Q but when I called Hard Enduro Outfitters they had all the info. If you run into availability problems and there IS a slight bend and difference and not just supplier or brand I suspect you could tweak a Gnarly by placing in a vice or jig and tugging on it a bit. I have moved bent ones a fair bit back to straight with inserting a large socket into the goesinta end with a few feet of 1/2 drive extensions and tugging the correct direction.
2022 250 SE Factory

alang

  • Vet
  • *****
  • Posts: 693
    • View Profile
    • Email
Re: fmf pipe fitment
« Reply #2 on: January 05, 2022, 01:32:47 PM »
17 slightly different than 18+
2022 Sherco 300 2T Factory
2016 Aprilia Tuono 1100 Factory
2019 Santa Cruz Tallboy Carbon R
Azle, Texas

TTBadDog

  • Junior
  • **
  • Posts: 57
    • View Profile
Re: fmf pipe fitment
« Reply #3 on: January 06, 2022, 05:59:03 AM »
Not having done it myself on the Sherco bu you could likely bend to fit. Not sure why you would want to, there are plenty of FMC Gnarly available for a 17. Slavens AOMC to name a few. Is your existing just too bashed up to fix? Get a new one and a good pipe cage. I expect to run my original pipe a LONG TIME.
https://www.ebay.com/itm/313522359487
Not really that heavy, I spry Muck Off on the pipe and most of the mud just slides off.
2022 250 SE Factory

Dburrell

  • Novice
  • *
  • Posts: 16
    • View Profile
Re: fmf pipe fitment
« Reply #4 on: January 13, 2022, 08:21:04 AM »
The flange is different and you can only get Gnarly for the 17 model and only through Sherco. You can purchase a Scalvini...Only other manufacture i have found..
https://www.motomandistributing.com/scalvini-usa-applications/sherco
« Last Edit: January 13, 2022, 08:22:42 AM by Dburrell »